Minneapolis benchmarking compliance, filed for you
The Minneapolis Commercial Building Rating and Disclosure Ordinance (47.190) requires covered buildings to report energy and water use every year. We gather the data, check it, and file it — usually within a week.
Who’s covered
Commercial buildings over 50,000 sq ft and city-owned buildings over 25,000 sq ft (multifamily is covered by the state program).
Annual deadline
June 1 for the previous calendar year.
Verification
No routine third-party verification — but the program runs its own data checks, so accuracy still matters.
Penalties
A $200 fine if not submitted by June 1, then repeat fines that double each time (up to four). Unpaid fines are added to property taxes.
What is Minneapolis’s benchmarking ordinance?
Minneapolis adopted its Commercial Building Rating and Disclosure Ordinance (Ordinance 47.190) in February 2013, becoming the first city in the Midwest to require energy benchmarking. In 2019 the city expanded it to multifamily buildings.
Owners of large commercial and multifamily buildings must report a year of energy and water use through ENERGY STAR Portfolio Manager by June 1 each year, and the city publishes the results later in the summer.
Because Minneapolis’s ordinance is at least as strict as the Minnesota statewide program, Minneapolis buildings continue to report to the city.
Key dates
| Early in the year | City publishes “must comply” lists for commercial and multifamily buildings |
| June 1 | Annual energy and water benchmarking report due |
| Summer | City publishes building results |
We confirm current Minneapolis dates before every filing.
Is your building covered?
The ordinance covers buildings in Minneapolis that are:
- Commercial (non-residential, non-industrial) buildings of 50,000 sq ft or more.
- Multifamily residential buildings of 50,000 sq ft or more (added in 2019).
- City-owned buildings of 25,000 sq ft or more.
The city publishes separate “must comply” lists for commercial and multifamily buildings. Multiple buildings on a parcel may be combined to determine size.
What to report
All energy and water used by the whole building — including tenant spaces — for January 1 to December 31:
- Electricity — every meter serving the building
- Natural gas
- District steam, hot or chilled water, if you have it
- Delivered fuels (oil, diesel, propane) — all delivery receipts for the year
- On-site solar production, if any
- Water — whole-building water use
Leave out backup generator fuel. Note any meters added or removed during the year.
Good to know
- Larger buildings also have energy audit and tune-up requirements.
- Minnesota’s statewide program covers many of the same buildings.
What we’ll need from you
- Building address, plus any utility service addresses that differ from it
- Gross floor area for the whole building and each use (office, retail, residential…), number of units and year built
- Your Minneapolis Building ID (we can look it up)
- Utility data for the full calendar year, January 1 – December 31 (usually 13 months of bills)
- If tenants pay their own utilities: whole-building (aggregated) data from the utility, or signed tenant authorization forms
- Access to your ENERGY STAR Portfolio Manager account, if you have one
- Any notice or letter you received about this law
How to comply
- Check the “must comply” listConfirm your building is listed and note its city ID.
- Set up Portfolio ManagerEnter floor area, property uses and details, and the Minneapolis building ID.
- Collect whole-building energy and water dataRequest aggregated data from Xcel Energy and CenterPoint Energy, plus district energy and city water.
- Check data qualityFix gaps and outliers before submitting.
- Submit by June 1Report through the city’s Portfolio Manager data request and keep the confirmation.
Exemptions and extensions
Buildings can request an exemption in specific cases — for example, if they lacked a certificate of occupancy for the year, were mostly vacant, or are being demolished. Contact the city’s Energy Benchmarking team before the deadline.
Non-compliant buildings receive a violation notice and can be fined, starting with an initial fine and a short correction period.
Common mistakes we fix
- Assuming the statewide program replaces Minneapolis reporting — Minneapolis buildings report to the city
- Leaving out water, which the city requires
- Missing tenant-paid Xcel meters
- Not combining buildings on one parcel correctly
- Waiting for a notice instead of checking the “must comply” list
How 1st Green Choice helps
We file Minneapolis benchmarking reports for offices, multifamily, hotels and retail. We request aggregated energy data from Xcel and CenterPoint, include water use, set up Portfolio Manager and submit by June 1.
Minneapolis benchmarking questions
When is the Minneapolis benchmarking deadline?
Which Minneapolis buildings must benchmark?
Do Minneapolis buildings also report to the state?
Is water required in Minneapolis?
When did multifamily buildings start reporting?
What happens if I don’t comply?
Does Minneapolis publish results?
Is verification required?
Official sources: City of Minneapolis — Energy Benchmarking. Requirements change — we confirm current rules for every filing.
